WHY US
BUILT DIFFERENT
MATERIAL SPEC: UL 94 V-0 PC/ABS RESIN AT 1.4 MM
Our housing specification calls for PC/ABS F800 resin. The resin grade's UL Yellow Card lists a UL 94 V-0 flammability rating at 1.4 mm.
Scope note: This is a material-level recognition for the specified resin grade, not a UL Listing, UL Certification, or finished-product certification for the connector.
DOWNLOAD TECHNICAL DOSSIER (PDF)48-HOUR ASTM B117-19 SALT FOG SCREENING
A client-submitted LSS-100-QC connector sample was exposed to 48 hours of ASTM B117-19 laboratory salt fog. The lab reported no visible rust or surface color change after exposure.
Scope note: Accelerated laboratory screening; results apply only to the tested sample under the stated test conditions.
DOWNLOAD TECHNICAL DOSSIER (PDF)EU RoHS 10 SCREENING: TESTED METAL MATERIALS
Selected copper and nickel connector materials were screened against EU RoHS 10 restricted-substance limits under Directive 2011/65/EU Annex II, as amended by Directive (EU) 2015/863. The submitted samples passed the lab screening.
Scope note: Applies only to the tested materials identified in the report, not a blanket certification of every component in the finished product.
DOWNLOAD TECHNICAL DOSSIER (PDF)SUPPLIER TEST DATA: SELF-FUSING SILICONE TAPE
Supplier-commissioned lab data for a submitted self-fusing silicone tape sample shows 22.9 kV/mm dielectric breakdown strength under GB/T 1695-2005 and FV-0 vertical flame performance under GB/T 10707-2008.
Scope note: This is supplier test data for the submitted tape sample, not a UL, CSA, or finished-product certification.
DOWNLOAD TECHNICAL DOSSIER (PDF)